AB價格再下調!!!

[亍 ◣]

------------------------------------------------ From TritonLabs.com: "My fellow gamers, the Afterburner has been a great success since its release in May of 2003 as a result of the unprecedented level of support it received from customers like you and the gaming press. It has offered gamers around the world an unbeatable value in enhancing their ability to play the Game Boy Advance. As of January 9, 2003, we are proud to announce that the price of the Afterburner kit has been lowered to $25. We intend to remain competitive with our flagship product despite the recent weather change in the portable gaming industry. Indeed at this new price point the Afterburner's value for current GBA owners is even more impressive than before. Keep an eye out for two new product releases (neither light related) in the next three months. We are expecting to roll out our newest creation by the end of January. And the subsequent product is of epic proportions. To all of our customers: we will never forget your support and we hope you enjoy your Afterburners for years to come." -Adam Curtis, President/CEO ------------------------------------------------


仲想改的要忍下手先啦...

[t-cup]

鬼叫 GBA-SP 出現咩
哩o的錢.. 任天堂 梗係想賺埋佢啦

遲o的燈的耗電量低, 出隻可以入單三形的 GBA-SP, 咁又賺多筆!!

[亍 ◣]

我怕sp只係開始...之後半年出一個新款.....

[爸爸]

以前gb 少款咩..

[singsingsing]

我個friend 間廠做ab o個pat o野既,
佢話成本只係幾蚊

[i wanna buy GBA]

singsingsing：

你搵你個frd買一大批黎呢度放
當益班網友兼搵返筆都好o額！

[chobits]

幾蚊成本 賣幾百蚊....食水都好深喎

[小苦妹]

Originally posted by singsingsing :
我個friend 間廠做ab o個pat o野既,
佢話成本只係幾蚊

你個FD話佢o個PART要幾蚊定成舊野要幾蚊,我諗成份野個成本都一定唔只呢個數,更何況人地R&D都要有回報先得

[阿高]

唉,e+先減.....
儲錢買GBA SP仲好.....

[赤武神]

平我都唔改...廢事入塵...所以等GBA SP

[小苦妹]

我之前係鰝鬻鴷,總共改了三次,最後出黎好得(經過一番波折,我知道邊間好)
其實平真係改得過(只要你M間好就得)
我寫信問過一個外國WEB SITE既EDITOR(佢有份出席EUROPE既GBASP PRESENTATION)有關GBA+AB Vs GBASP,以下係佢既回覆,大家可作參考

It's every bit as good. No better, no worse, really. If you've already got a
GBA and can get the Afterburner installed at a good price, it's worth
considering over the GBASP.

Gareth Ramsay,
Editor,
http://www.ComputerAndVideoGames.com

[i wanna buy GBA]

小苦妹：

我想問你o係邊間改好？要幾錢？

[singsingsing]

佢做o個塊反光板,用車床車出來,最主要係個技術問題,要買個patent,同埋部機,因為要用鑽石刀車
佢話車出來好平,不過唔係間間廠做到.
要車到一條條patten, 等d光射落去,塊板會發光,佢話會比d我試,不過我唔想改部機.
拎外o個d超光led, 加幾條反光條,你自己出面買梗係要幾廿蚊啦,人地成批買,梗平d啦
所以成pat o野,成本10蚊唔駛(唔計patent,都唔係好多錢,主要係無乜人做到)

[赤武神]

pocket.ign.com~~話SP好DD~~~
不過如果唔出SP的話...我應該改~~^^

[真‧雙貓抓門]

對我黎講SP 正好多。因為細左 (我唔帶袋出街，要袋落褲。)

[赤武神]

Since last summer, I’ve had both of my GBA’s modified with Afterburners, and I still think they look decent next to a GBA SP. But I have to say Nintendo’s screen is no doubt cleaner, more vivid, and fresher looking than a mod. I’m not going to recommend against getting your current GBA modified, because if you can’t afford a GBA SP, by all means, mod your GBA. But if you really want to see a clean looking display, I would start saving those pennies and pony up for the GBA SP. The Afterburner made the original GBA’s screen viewable, but the GBA SP is mere perfection. The only downside to the GBA SP’s lit screen is that there is no brightness dial like the Afterburner can have.

SP Screen is lit from the sides, just like the Afterburner, but the GBA SP is lit from ALL sides, not just the top down like the AfterBurner.
GBA SP looks better than the Afterburner, with no blue tint

copy from planetgamecube.com

[亍 ◣]

Originally posted by singsingsing :
佢做o個塊反光板,用車床車出來,最主要係個技術問題,要買個patent,同埋部機,因為要用鑽石刀車
佢話車出來好平,不過唔係間間廠做到.
要車到一條條patten, 等d光射落去,塊板會發光,佢話會比d我試,不過我唔想改部機.
拎外o個d超光led, 加幾條反光條,你自己出面買梗係要幾廿蚊啦,人地成批買,梗平d啦
所以成pat o野,成本10蚊唔駛(唔計patent,都唔係好多錢,主要係無乜人做到)

有冇多反光板,我想要一塊....而家o個塊有d花....

[i wanna buy GBA]

出SP，AB個價落反而想裝AB

[小苦妹]

Originally posted by i wanna buy GBA :
小苦妹：

我想問你o係邊間改好？要幾錢？

原本tritonlabs(出AB)教人加光暗掣係出面,但聽聞呢個方法唔太好,玩得耐好易甩,黃金個肥仔(費事講名,佢係專改機的那一個,我諗你知掛)的方法較好,佢把光暗掣加在大細聲上面,一黎唔駛鑽個HOLE,二來比較穏,我建議你得要求咁改法(我問過唔少舖頭,有好多話加個光暗掣無用,但我可以話俾你聽佢地揾笨)

至於安裝,在高登的麥高(或新麥高,我唔肯定個名)最好,個老板知到點樣消靜電,無靜電便會勁少塵(唔可以話100%無,但真係勁少,你可以睇下佢個板先再決定改唔改),我因為只係揾佢更換發光片,所以唔係全價(我之前揾過兩三間改),全價佢會收人三百二度,我同佢傾過,我再改會收三百,但依家AB個價底左,咁就唔知幾時會反映出黎,或者你可以問下先

我唔寫咁多,你有乜問題再POST問我啦,希望呢D資料可以幫你啦

[i wanna buy GBA]

小苦妹：

唔該你先。咁我想問你之前換過o個o的又點唔好呢？仲有，你前前後後駛左幾錢o係裝AB？

[q^__^p]

"As of January 9, 2003, we are proud to announce that the price of the Afterburner kit has been lowered to $25. "
請問，下調幅度多少? 由幾多錢減至$25?

btw，我都想改好耐，但見過部份game店改得超爛(機板店、黃金CD舖對面的老翻店)，所以一直在物色一間改工較好的，thx小苦妹的提供
小苦妹，請問你用左Vol Button較光暗後，仲有冇得較大細聲?

P.S.我拎過兩部GBA俾黃金肥仔改大聲，改完後兩部機背都有少裂痕，不過接受左...

[q^__^p]

謝謝.

[i wanna buy GBA]

係呢，我都想知仲有無得較大細聲？定係大聲光o的，細聲就無光咁呢？﹙笑﹚
唔知幾個一齊改有無得平o的呢？﹙再笑﹚

[小苦妹]

i wanna buy GBA:
裝AB最難但最重要是要貼上一張AR FILM既野(一張類似PDA D SCREEN PROTECTOR既野),因為要貼上呢張野D 顏色先唔會WASH OUT咁,但因為有唔少舖頭唔知點解決塵的問題(D 人都會係自己舖頭就咁裝,你諗下黃金/高登有幾多平時唔留意到既塵?),所以一D無咁好既舖頭會直頭唔裝,咁一D唔知既人咪死晒火,架機係好光,但根本唔靚.另一D舖頭好D,會貼呢張野,但因為有塵,你改完之後一開燈就好覺,所以邊一間能夠最少塵效果會最好
另外,裝發光片都要係部GBA度CUT 一D膠,我介紹的那一個比那個肥仔CUT 的更好,更細心,所以我會介紹你去
q^__^p:

改完後會仲有較大細聲的,請放心
我都有揾肥仔改過其他野,我覺得佢改野已經俾另外一D好,不過佢D態度呢...

[i wanna buy GBA]

小苦妹請收pm